{"id":2031,"date":"2024-06-17T14:04:31","date_gmt":"2024-06-17T14:04:31","guid":{"rendered":"https:\/\/rolexiron.com\/?page_id=2031"},"modified":"2024-06-17T14:04:31","modified_gmt":"2024-06-17T14:04:31","slug":"manufacture-of-soft-magnetic-alloys-in-japan-korea-china-usa-europe","status":"publish","type":"page","link":"https:\/\/rolexiron.com\/index.php\/manufacture-of-soft-magnetic-alloys-in-japan-korea-china-usa-europe\/","title":{"rendered":"Manufacture of Soft Magnetic Alloys in Japan, Korea, China, USA, Europe"},"content":{"rendered":"\n

Manufacture of Soft Magnetic Alloys in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

Manufacturer of Soft Magnetic Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

Manufacture of Soft Magnetic Alloys Rods, Bars, Sheets, Plates, Strips, Foils, Wires
Manufacture of Soft Magnetic Alloy Rod, Bar, Sheet, Plate, Strip, Foil, Wire<\/p>\n\n\n\n

Hiperco 50A Rods, Bars, Sheets, Plates, Strips, Foils, Wires
HiperCo 27 Rods, Bars, Sheets, Plates, Strips, Foils, Wires
HiperCo27 alloy is an iron-cobalt-chromium soft magnetic alloy possessing the highest degree of ductility and toughness
in the commercially available iron-cobalt grades of high saturation and high Curie temperature soft magnetic alloys.
Although the permeability and coercive force of HiperCo 50 alloy are somewhat better than HiperCo 27 alloy,
the magnetic saturation of both alloys is nearly identical. In addition, HiperCo 27 alloy does not exhibit the brittleness
of HiperCo 50 alloy.
Forms: Sheet\/Plate, Bar\/Rod\/Coil
Manufacture of Hiperco 50A Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Hiperco-50A Alloy in Japan, Korea, China, USA, Europe
Manufacture of Hiperco 27 Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Hiperco-27 Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

DESCRIPTION
HiperCo27 alloy is an iron-cobalt-chromium soft magnetic alloy possessing the highest degree of ductility and toughness
in the commercially available iron-cobalt grades of high saturation and high Curie temperature soft magnetic alloys.
Although the permeability and coercive force of HiperCo 50 alloy are somewhat better than HiperCo 27 alloy,
the magnetic saturation of both alloys is nearly identical. In addition, HiperCo 27 alloy does not exhibit the brittleness
of HiperCo 50 alloy.<\/p>\n\n\n\n

APPLICATION
HiperCo27 alloy has been used in applications requiring a combination of good mechanical toughness, good ductility and
high saturation induction. Examples have included motors, generators, pole pieces, relays and magnetic shaft.<\/p>\n\n\n\n

Alloy 79 Rods, Bars, Sheets, Plates, Strips, Foils, Wires
Alloy 79 is a soft magnetic alloy consisting of 80% Nickel, 5% Molybdenum, and balance Iron used where extremely
high initial & maximum permeability and minimum hysteresis is needed.
Forms: Sheet\/Plate, Bar\/Rod\/Coil
Manufacture of Alloy 79 Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Alloy-79 Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

DESCRIPTION
A soft magnetic alloy consisting of 80% Nickel, 5% Molybdenum, and balance Iron used where extremely high initial &
maximum permeability and minimum hysteresis is needed.<\/p>\n\n\n\n

APPLICATION
Electro-magnetic shielding, specialty transformer laminations, toroidal tape wound cores, high quality motor laminations,
stepping motors.<\/p>\n\n\n\n

Cross Reference
IEC Russia U.S.A Japan
E11c 79HMA Mumetal Supermalloy PCS<\/p>\n\n\n\n

65-Permalloy Rods, Bars, Sheets, Plates, Strips, Foils, Wires
65-Permalloy has a hysteresis loop and high saturation induction intensity. 65-Permalloy working in a secondary magnetic
field of magnetic amplifier,chock coil,and computer components,etc.
Forms: Sheet\/Plate,Wire,Bar\/Rod\/Coil
Manufacture of Permalloy 65 Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Permalloy-65 Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

DESCRIPTION
65-Permalloy has a hysteresis loop and high saturation induction intensity.<\/p>\n\n\n\n

APPLICATION
Working in a secondary magnetic field of magnetic amplifier, chock coil, and computer components, etc.<\/p>\n\n\n\n

Cross Reference<\/p>\n\n\n\n

IEC Russia U.S.A Japan
E32a 65?? 65-Permalloy PE<\/p>\n\n\n\n

12Alfenal Rods, Bars, Sheets, Plates, Strips, Foils, Wires
Fe-Al alloys contain 6% to 16% aluminum , the rest elements is the iron. The alloys have high resistivity, lower density
and higher hardness of soft magnetic alloy. This family of alloy is suitable for the special environment
(such as nuclear radiation, shock, acceleration, etc.), and resistance to corrosion and oxidation resistance are better
than those of nickel-iron&soft magnetic alloys, and silicon steel.
Forms: Sheet\/Plate, Bar\/Rod\/Wire\/Coil
Manufacture of 12Alfenal Alloys in Japan, Korea, China, USA, Europe
Manufacturer of 12-Alfenal Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

DESCRIPTION
Fe-Al alloys contain 6% to 16% aluminum , the rest elements is the iron. The alloys have high resistivity, lower density
and higher hardness of soft magnetic alloy. This family of alloy is suitable for the special environment
(such as nuclear radiation, shock, acceleration, etc.), and resistance to corrosion and oxidation resistance are better
than those of nickel-iron&soft magnetic alloys, and silicon steel.<\/p>\n\n\n\n

APPLICATION
Fe-Al alloys have accessed to a broad industrial application in the fields of aviation, space flight, navigation,
and other civilian and military industries.<\/p>\n\n\n\n

Cross Reference
Russia U.S.A Japan
?12 12Alfenal Hypermal<\/p>\n\n\n\n

430FR Rods, Bars, Sheets, Plates, Strips, Foils, Wires
430FR is corrosion-resisting soft magnetic Fe-Cr alloy, which has high magnetic induction,low coercive force as well as
high resistivity. It is mainly used as magnetic material in all kinds of electromagnetically operated valves in contact with
corrosive medium as well as in the electro-hydraulic valve of aeroengine.
Forms: Bar\/Rod
Manufacture of 430FR Alloys in Japan, Korea, China, USA, Europe
Manufacturer of 430-FR Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

DESCRIPTION
This material is corrosion-resisting soft magnetic Fe-Cr alloy, which has high magnetic induction, low coercive force
as well as high resistivity.<\/p>\n\n\n\n

APPLICATION
It is mainly used as magnetic material in all kinds of electromagnetically operated valves in contact with corrosive medium
as well as in the electro-hydraulic valve of aeroengine.<\/p>\n\n\n\n

Soft magnetic Iron Cobalt alloy ASTM A801 R30005 Co49 V2 Fe49 Rods, Bars, Sheets, Plates, Strips, Foils, Wires
Co49 V2 Fe49 is a high-saturation magnetic induction strength iron-cobalt-vanadium soft magnetic alloy. In the existing
soft magnetic materials, the alloy has the highest saturation magnetic induction (2.4T) and a high Curie point (940?).
Due to the high saturation magnetic induction, when manufacturing a motor of the same power, the volume can be greatly
reduced,and the weight can be reduced, which is less than 50% of that of an ordinary motor. Moreover, the motor has
high sensitivity, low heat generation,good stability and long life. Due to the high Curie point, the alloy can be operated at
higher temperatures where other soft magnetic alloy materials have been completely demagnetized and maintain good
magnetic stability. The performance stability of the motor is better than that of the permanent magnet motor at higher
operating temperatures.
Manufacture of Co49V2Fe49 Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Co49-V2-Fe49 Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

Soft Magnetic -Cobalt Iron Alloy Co49 V2 Fe49 Rods, Bars, Sheets, Plates, Strips, Foils, Wires
Co49 V2 Fe49 ,Equivalent to Carpenter Hiperco 50,Vacoflux 50, is a high-saturation magnetic induction strength
iron-cobalt-vanadium soft magnetic alloy. In the existing soft magnetic materials, the alloy has the highest saturation
magnetic induction (2.4T) and a high Curie point (940?). Due to the high saturation magnetic induction, when manufacturing
a motor of the same power, the volume can be greatly reduced,and the weight can be reduced, which is less than 50% of
that of an ordinary motor. Moreover, the motor has high sensitivity, low heat generation, good stability and long life.
Due to the high Curie point, the alloy can be operated at higher temperatures where other soft magnetic alloy materials
have been completely demagnetized and maintain good magnetic stability. The performance stability of the motor is
better than that of the permanent magnet motor at higher operating temperatures.
The alloy is melted using Vacuum Induction Melting (VIM) techniques.<\/p>\n\n\n\n

Standard Specification :ASTM A801-14 Alloy 1<\/p>\n\n\n\n

Alloy 50 Rods, Bars, Sheets, Plates, Strips, Foils, Wires
A soft magnetic alloy, consisting of 49% Nickel, balance Iron used where high initial permeability, maximum permeability,
and low core loss is needed.
Forms: Sheet\/Plate, Bar\/Rod\/Coil
Manufacture of Alloy 50 Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Alloy-50 Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

DESCRIPTION
A soft magnetic alloy, consisting of 49% Nickel, balance Iron used where high initial permeability, maximum permeability,
and low core loss is needed.<\/p>\n\n\n\n

APPLICATION
Transformer cores, highly efficient motors, shielding, and specialized electronic devices, such as LF power transducers,
chokes, relay parts, solenoids & oscillators.<\/p>\n\n\n\n

Cross Reference
IEC Russia U.S.A Japan
Ella 50H Hy-Ra49 Permalloy PB<\/p>\n\n\n\n

Permalloy 80\/Mumetal Rods, Bars, Sheets, Plates, Strips, Foils, Wires
Permalloy 80\/Mumetal is a highly magnetic nickel-molybdenum-iron alloy, with roughly 80% nickel and 15% iron and
5% molybdenum content. It’s useful as a magnetic core material in electrical and electronic equipment. Permalloy 80
provides high initial and maximum permeabilities with low coercive force, low hysteresis loss, low eddy-current losses,
and low magnetostriction which is critical for industrial applications.
Forms: Sheet\/Plate,Wire,Bar\/Rod\/Coil
Manufacture of Permalloy 80 Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Permalloy-80 Alloy in Japan, Korea, China, USA, Europe
Manufacture of MuMetal Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Mu-Metal Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

DESCRIPTION
Permalloy 80\/Mumetal is a highly magnetic nickel-molybdenum-iron alloy, with roughly 80% nickel and 15% iron and
5% molybdenum content. It’s useful as a magnetic core material in electrical and electronic equipment. Permalloy 80
provides high initial and maximum permeabilities with low coercive force, low hysteresis loss, low eddy-current losses,
and low magnetostriction which is critical for industrial applications.<\/p>\n\n\n\n

APPLICATION
Transformer laminations; Relay;Recording Heads;Deflection and Focusing Yokes; Amplifiers;Loudspeakers;Shielding.<\/p>\n\n\n\n

Cross Reference
IEC Russia U.S.A Japan
Ellc 79HM 4-79 Permalloy –<\/p>\n\n\n\n

Mutemp
This is a kind of low Curie temperature (25 ? ~ 200 ?) alloy, its outstanding characteristic is below the Curie temperature,
magnetic induction intensity decreases sharply with the temperature rise, and is almost linear relationship.
Forms: Sheet\/Plate, Bar\/Rod\/Coil
Manufacture of MuTemp Alloys in Japan, Korea, China, USA, Europe
Manufacturer of Mu-Temp Alloy in Japan, Korea, China, USA, Europe<\/p>\n\n\n\n

DESCRIPTION
This is a kind of low Curie temperature (25 ? ~ 200 ?) alloy, its outstanding characteristic is below the Curie temperature,
magnetic induction intensity decreases sharply with the temperature rise, and is almost linear relationship.<\/p>\n\n\n\n

APPLICATION
Permanent magnet of the traveling wave tube, magnetron,, voltage regulator, mileage rate table, gas table, temperature,
magnetic shunt compensation of watt-hour meter and other components or thermal components.<\/p>\n\n\n\n

Cross Reference
IEC Russia U.S.A Japan<\/p>\n\n\n\n